Merge branch 'master' of http://106.52.233.130:3000/helloyifa/temperature_iT18
This commit is contained in:
commit
bace157a54
Binary file not shown.
@ -112,6 +112,12 @@
|
||||
"force_ps_pub.h": "c",
|
||||
"generic.h": "c",
|
||||
"rtc_reg.h": "c",
|
||||
"rtc_reg_pub.h": "c"
|
||||
"rtc_reg_pub.h": "c",
|
||||
"sockets.h": "c",
|
||||
"utils_timer.h": "c",
|
||||
"utils_net.h": "c",
|
||||
"lite-log.h": "c",
|
||||
"netdb.h": "c",
|
||||
"rtc.h": "c"
|
||||
}
|
||||
}
|
||||
@ -17,6 +17,7 @@
|
||||
#include "app_voice_player.h"
|
||||
#include "BkDriverFlash.h"
|
||||
#include "manual_ps_pub.h"
|
||||
|
||||
#ifdef PKG_USING_EASYFLASH
|
||||
#include "easyflash.h"
|
||||
|
||||
@ -381,6 +382,7 @@ UINT32 usb_power_is_pluged(void)
|
||||
return (reg & (1 << 21));
|
||||
}
|
||||
void box_poweroff_timeout_callback(void *arg);
|
||||
int first_poweron = 0;
|
||||
void timer_check_device_run_callback(void *arg){
|
||||
|
||||
uint16_t reg_charge = CHARGE_REG0X2_CHARGE_X_STA_GET(0);
|
||||
@ -390,18 +392,19 @@ void timer_check_device_run_callback(void *arg){
|
||||
box_info.charge_state = 0;
|
||||
}else{
|
||||
box_info.charge_state = 1;
|
||||
for(int i = 0; i < 5; i++){ //1秒内处于合盖状态就关机
|
||||
if(hall){
|
||||
rt_kprintf("usb_power_is_pluged reg:%d state:%d hall:%d\r\n", reg_charge, box_info.charge_state, box_info.hall_state);
|
||||
return;
|
||||
}
|
||||
rt_thread_mdelay(200);
|
||||
}
|
||||
box_poweroff_timeout_callback(NULL);
|
||||
}
|
||||
// box_info.charge_state = 0;
|
||||
rt_kprintf("usb_power_is_pluged reg:%d state:%d hall:%d\r\n", reg_charge, box_info.charge_state, box_info.hall_state);
|
||||
|
||||
for(int i = 0; i < 5; i++){ //1秒内处于合盖状态就关机
|
||||
if(hall || !first_poweron){
|
||||
first_poweron = 1;
|
||||
return;
|
||||
}
|
||||
rt_thread_mdelay(600);
|
||||
}
|
||||
//rtos_start_timer(&timer_poweroff);
|
||||
box_poweroff_timeout_callback(NULL);
|
||||
//合盖状态接入充电 ---> 关机
|
||||
// if (box_info.hall_state == 0)
|
||||
// {
|
||||
@ -813,13 +816,9 @@ void app_enter_ui(app_ui_mode mode){
|
||||
{
|
||||
case UI_BOX_BATTERY:
|
||||
app_show_box_battery();
|
||||
//static int battery_timer_inited = 0;
|
||||
if(box_info.charge_state)
|
||||
{
|
||||
rtos_init_timer(&timer_battery_refresh, 10000, timer_battery_refresh_callback, NULL);
|
||||
rtos_start_timer(&timer_battery_refresh);
|
||||
// battery_timer_inited = 1;
|
||||
}
|
||||
|
||||
rtos_init_timer(&timer_battery_refresh, 10000, timer_battery_refresh_callback, NULL);
|
||||
rtos_start_timer(&timer_battery_refresh);
|
||||
|
||||
break;
|
||||
case UI_SHOW_DEVICE_INFO:
|
||||
@ -901,14 +900,22 @@ void charge_sleep_on(int on) {
|
||||
if (oled_is_on != on) {
|
||||
oled_is_on = on;
|
||||
if (on){
|
||||
bk_reboot();
|
||||
//bk_reboot();
|
||||
OLED_DisPlay_On();//屏幕
|
||||
voice_player_mute(1); //声音
|
||||
// OLED_DisPlay_On();//屏幕
|
||||
// voice_player_mute(1); //声音
|
||||
// rtos_start_timer(&timer_detect);
|
||||
// bk_wlan_start_sta(BK_STATION); //WIFI
|
||||
// belon_ble_scan_start(); //蓝牙扫描
|
||||
// belon_ble_start_adv(); //蓝牙广播
|
||||
}else{
|
||||
OLED_DisPlay_Off();//屏幕
|
||||
voice_player_mute(0); //声音
|
||||
rtos_stop_timer(&timer_detect);
|
||||
bk_wlan_stop(BK_STATION); //WIFI
|
||||
belon_ble_scan_stop(); //蓝牙扫描
|
||||
belon_ble_deinit_adv(); //蓝牙广播
|
||||
// rtos_stop_timer(&timer_detect);
|
||||
// //bk_wlan_stop(BK_STATION); //WIFI
|
||||
// belon_ble_scan_stop(); //蓝牙扫描
|
||||
// belon_ble_deinit_adv(); //蓝牙广播
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -939,7 +946,7 @@ void box_poweroff_timeout_callback(void *arg){
|
||||
if (box_info.charge_state) {
|
||||
oled_is_on = 1;
|
||||
charge_sleep_on(0);
|
||||
//return;
|
||||
return;
|
||||
}
|
||||
bk_gpio_config_output(BLE_TEMPERATURE_BOX_POWER_CTR);
|
||||
bk_gpio_output(BLE_TEMPERATURE_BOX_POWER_CTR,0);
|
||||
@ -1041,6 +1048,7 @@ void timer_hall_detect_callback(void *arg){
|
||||
rtos_stop_timer(&timer_poweroff);
|
||||
}
|
||||
if(!oled_is_on){ //充电时开盖复位设备
|
||||
rt_kprintf("charge_sleep_on(1) !!!\r\n");
|
||||
charge_sleep_on(1);
|
||||
}
|
||||
// 只有在5秒内且开关盖次数达到5才进入绑定
|
||||
@ -1324,8 +1332,6 @@ void poka_client_password(){
|
||||
rt_kprintf("password=%s\r\n", mqtt_password);
|
||||
}
|
||||
|
||||
|
||||
|
||||
void temperature_init(void){
|
||||
|
||||
extern long list_memheap(void);
|
||||
@ -1352,6 +1358,9 @@ void temperature_init(void){
|
||||
rtos_init_timer(&timer_poweroff, BLE_TEMPERATURE_POWEROFF_TIMEOUT, box_poweroff_timeout_callback, NULL);
|
||||
rtos_init_timer(&timer_bind, BLE_TEMPERATURE_BIND_MODE_TIMEOUT, box_bind_timeout_callback, NULL);
|
||||
rtos_init_timer(&timer_idle, BLE_TEMPERATURE_IDLE_MODE_TIMEOUT, timer_app_idle_callback, NULL);
|
||||
|
||||
|
||||
|
||||
//初始化电量
|
||||
box_init_power();
|
||||
// user_app_start();
|
||||
|
||||
@ -9,6 +9,7 @@
|
||||
#include "rw_pub.h"
|
||||
#include "belon_ble.h"
|
||||
#include "app_temperature.h"
|
||||
#include "utils_httpc.h"
|
||||
#include "ntp.h"
|
||||
#if (CFG_BLE_VERSION == BLE_VERSION_5_2)
|
||||
#include "app_ble.h"
|
||||
@ -46,7 +47,7 @@ char last_password[65] = {0};
|
||||
extern char mqtt_username[128];
|
||||
extern char mqtt_password[128];
|
||||
|
||||
char g_sta_mac[6] = {0};
|
||||
char g_sta_mac[6] = {0};
|
||||
|
||||
static const uint8_t test_svc_uuid[16] = {0xFF,0xFF,0,0,0x34,0x56,0,0,0,0,0x28,0x37,0,0,0,0};
|
||||
app_dev_config_t dev_config = {0};
|
||||
@ -54,6 +55,7 @@ extern int hostapd_scan_started; //扫描wifi全局变量
|
||||
|
||||
static beken_timer_t ble_idle;
|
||||
rt_thread_t tid_ntp; //ntp时间戳
|
||||
rt_thread_t tid_register; //register时间戳
|
||||
enum
|
||||
{
|
||||
TEST_IDX_SVC,
|
||||
@ -280,7 +282,54 @@ void connect_mqtt(){//创建线程
|
||||
tid_ntp = rt_thread_create("ntp_get", ntp_get_time_thread, RT_NULL, 2048, 20, 10);
|
||||
if (tid_ntp) rt_thread_startup(tid_ntp);
|
||||
}
|
||||
static void send_json_register(void *parameter){
|
||||
httpclient_t client;
|
||||
httpclient_data_t client_data;
|
||||
char *url = "https://dev.xa-poka.com/register";
|
||||
char json_body[512];
|
||||
char response[512];
|
||||
|
||||
os_memset(&client, 0, sizeof(httpclient_t));
|
||||
os_memset(&client_data, 0, sizeof(httpclient_data_t));
|
||||
os_memset(&json_body, 0, sizeof(512));
|
||||
|
||||
bk_wifi_get_station_mac_address(g_sta_mac);
|
||||
|
||||
bk_printf("Device MAC: %02X%02X%02X%02X%02X%02X\r\n",
|
||||
g_sta_mac[0], g_sta_mac[1], g_sta_mac[2], g_sta_mac[3], g_sta_mac[4], g_sta_mac[5]);
|
||||
|
||||
snprintf(json_body, sizeof(json_body),
|
||||
"{"
|
||||
"\"device_id\":\"%s_%02X%02X%02X%02X%02X%02X\","
|
||||
"\"device_name\":\"%02X%02X%02X%02X%02X%02X\","
|
||||
"\"product_id\":\"%s\","
|
||||
"\"secure_id,ontimempty\":\"poka\","
|
||||
"\"secure_key,ontimempty\":\"Poka&Lock12345\","
|
||||
"\"product_name\":\"腋温计网关\""
|
||||
"}",PRODUCTID,g_sta_mac[0],g_sta_mac[1],g_sta_mac[2],g_sta_mac[3],g_sta_mac[4],g_sta_mac[5],
|
||||
g_sta_mac[0],g_sta_mac[1],g_sta_mac[2],g_sta_mac[3],g_sta_mac[4],g_sta_mac[5],PRODUCTID);
|
||||
|
||||
client_data.post_buf = json_body;
|
||||
client_data.post_buf_len = strlen(json_body);
|
||||
client_data.post_content_type = "application/json";
|
||||
client_data.response_buf = response;
|
||||
client_data.response_buf_len = sizeof(response);
|
||||
|
||||
int ret = httpclient_common(&client, url, 443, NULL, HTTPCLIENT_POST, 10000, &client_data);
|
||||
if (ret == 0) {
|
||||
bk_printf("HTTP response: %s\r\n", response);
|
||||
} else {
|
||||
bk_printf("HTTP POST failed: %d\r\n", ret);
|
||||
}
|
||||
}
|
||||
void json_register(){//创建线程
|
||||
if(tid_register){
|
||||
rt_thread_detach(tid_register);
|
||||
tid_register = NULL;
|
||||
}
|
||||
tid_register = rt_thread_create("register", send_json_register, RT_NULL, 2048, 20, 10);
|
||||
if (tid_register) rt_thread_startup(tid_register);
|
||||
}
|
||||
void wifi_status_cb(void *param){
|
||||
LinkStatusTypeDef status;
|
||||
bk_wlan_get_link_status(&status);
|
||||
@ -295,10 +344,10 @@ void wifi_status_cb(void *param){
|
||||
bk_printf("SSID=%s, PASSWORD=%s\r\n", last_ssid, last_password);
|
||||
|
||||
wifi_save_ssid_pass(last_ssid, last_password, status.bssid, status.channel, status.security);
|
||||
|
||||
bk_wifi_get_station_mac_address(g_sta_mac);
|
||||
bk_printf("Device MAC: %02X%02X%02X%02X%02X%02X\r\n",
|
||||
g_sta_mac[0], g_sta_mac[1], g_sta_mac[2], g_sta_mac[3], g_sta_mac[4], g_sta_mac[5]);
|
||||
json_register();
|
||||
// bk_wifi_get_station_mac_address(g_sta_mac);
|
||||
// bk_printf("Device MAC: %02X%02X%02X%02X%02X%02X\r\n",
|
||||
// g_sta_mac[0], g_sta_mac[1], g_sta_mac[2], g_sta_mac[3], g_sta_mac[4], g_sta_mac[5]);
|
||||
ble_report_state(3);//连接成功
|
||||
connect_mqtt();
|
||||
}
|
||||
|
||||
@ -323,7 +323,7 @@
|
||||
|
||||
/*section 21 ----- support ota*/
|
||||
#if( ( CFG_SUPPORT_ALIOS ) || ( CFG_SUPPORT_RTT ) || (CFG_SUPPORT_MATTER == 1))
|
||||
#define CFG_SUPPORT_OTA_HTTP 0
|
||||
#define CFG_SUPPORT_OTA_HTTP 1
|
||||
#else
|
||||
#define CFG_SUPPORT_OTA_HTTP 1
|
||||
#endif
|
||||
|
||||
@ -5,6 +5,7 @@
|
||||
#include "errno.h"
|
||||
#include "lwip/sockets.h"
|
||||
#include "lwip/netdb.h"
|
||||
#include <netdb.h>
|
||||
#include "utils_timer.h"
|
||||
#include "str_pub.h"
|
||||
#include "mem_pub.h"
|
||||
@ -28,7 +29,7 @@ uintptr_t HAL_TCP_Establish(const char *host, uint16_t port)
|
||||
hints.ai_protocol = IPPROTO_TCP;
|
||||
sprintf(service, "%u", port);
|
||||
|
||||
if ((rc = getaddrinfo(host, service, &hints, &addrInfoList)) != 0) {
|
||||
if ((rc = lwip_getaddrinfo(host, service, &hints, &addrInfoList)) != 0) {
|
||||
log_err("getaddrinfo error");
|
||||
return 0;
|
||||
}
|
||||
@ -41,14 +42,15 @@ ES_RETRY:
|
||||
continue;
|
||||
}
|
||||
|
||||
fd = socket(cur->ai_family, cur->ai_socktype, cur->ai_protocol);
|
||||
|
||||
fd = lwip_socket(cur->ai_family, cur->ai_socktype, cur->ai_protocol);
|
||||
if (fd < 0) {
|
||||
log_err("create socket error");
|
||||
rc = 0;
|
||||
continue;
|
||||
}
|
||||
|
||||
if (connect(fd, cur->ai_addr, cur->ai_addrlen) == 0) {
|
||||
if (lwip_connect(fd, cur->ai_addr, cur->ai_addrlen) == 0) {
|
||||
rc = fd;
|
||||
break;
|
||||
}
|
||||
@ -67,7 +69,7 @@ ES_RETRY:
|
||||
} else {
|
||||
log_err("success to establish tcp, fd=%d", rc);
|
||||
}
|
||||
freeaddrinfo(addrInfoList);
|
||||
lwip_freeaddrinfo(addrInfoList);
|
||||
|
||||
return (uintptr_t)rc;
|
||||
}
|
||||
@ -141,7 +143,7 @@ int32_t HAL_TCP_Write(uintptr_t fd, const char *buf, uint32_t len, uint32_t time
|
||||
}
|
||||
|
||||
if (ret > 0) {
|
||||
ret = send(fd, buf + len_sent, len - len_sent, 0);
|
||||
ret =lwip_send(fd, buf + len_sent, len - len_sent, 0);
|
||||
if (ret > 0) {
|
||||
len_sent += ret;
|
||||
} else if (0 == ret) {
|
||||
@ -191,7 +193,7 @@ int32_t HAL_TCP_Read(uintptr_t fd, char *buf, uint32_t len, uint32_t timeout_ms)
|
||||
if ( FD_ISSET( fd, &sets ) )
|
||||
{
|
||||
if (ret > 0) {
|
||||
ret = recv(fd, buf, len, 0);
|
||||
ret = lwip_recv(fd, buf, len, 0);
|
||||
if (ret > 0) {
|
||||
if(ret < len)
|
||||
{
|
||||
|
||||
@ -323,7 +323,7 @@
|
||||
|
||||
/*section 21 ----- support ota*/
|
||||
#if( ( CFG_SUPPORT_ALIOS ) || ( CFG_SUPPORT_RTT ) || (CFG_SUPPORT_MATTER == 1))
|
||||
#define CFG_SUPPORT_OTA_HTTP 0
|
||||
#define CFG_SUPPORT_OTA_HTTP 1
|
||||
#else
|
||||
#define CFG_SUPPORT_OTA_HTTP 1
|
||||
#endif
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
Binary file not shown.
File diff suppressed because it is too large
Load Diff
@ -169,6 +169,52 @@
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
2025-07-21 10:01:29.176 Current port : COM6 + BaudRate : 115200 connect failed
|
||||
2025-07-21 10:01:29.177 Connect device fail!
|
||||
2025-07-21 10:01:29.188 Total Test Time : 0.000 s
|
||||
2025-07-21 10:01:29.188 Writing Flash Failed, code 0
|
||||
|
||||
2025-07-21 10:01:29.188
|
||||
==============================================================
|
||||
(warning)
|
||||
(_)
|
||||
__ ____ _ _ __ _ __ _ _ __ __ _
|
||||
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
|
||||
\ V V / (_| | | | | | | | | | | (_| |
|
||||
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
|
||||
__/ |
|
||||
|___/
|
||||
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
|
||||
|
||||
|
||||
=====================================================================
|
||||
cmdline: |C:/Users/hjf/Desktop/temperature_iT18/tool/BEKEN_BKFIL_V2.1.11.15_20241119/BEKEN_BKFIL_V2.1.11.15_20241119/bk_loader.exe download -p 6 -b 2000000 --uart-type OTHER --mainBin-multi C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin@0x0-0x132000 --reboot 0 --fast-link 1 |
|
||||
bk_loader version 2.1.11.15: build @Nov 14 2024 19:17:41
|
||||
|
||||
@ -2,25 +2,25 @@
|
||||
Theme=蓝色扁平
|
||||
latest_version=
|
||||
Language=0
|
||||
UartPort=3
|
||||
UartPort=10
|
||||
UartPort_selected=true
|
||||
Baudrate=2000000
|
||||
Origin_EXE=
|
||||
|
||||
[FileInfo]
|
||||
BinFileCheckState="true;"
|
||||
BinFilePath="D:/WORK/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin;"
|
||||
BinFilePath="C:/Users/hjf/Desktop/temperature_iT18/beken_rtt_sdk_release-SDK_3.0.76/out/all_2M.1220.bin;"
|
||||
BinFileStartAddress="0;"
|
||||
BinFileLength="0x132000;"
|
||||
BinFileCRC="0x89a01713;"
|
||||
BinFileCRC="0x7cc09418;"
|
||||
|
||||
[Common]
|
||||
Device_ID_0=c8
|
||||
Device_ID_1=47
|
||||
Device_ID_2=8c
|
||||
Device_ID_3=cb
|
||||
Device_ID_0=11
|
||||
Device_ID_1=22
|
||||
Device_ID_2=33
|
||||
Device_ID_3=44
|
||||
Device_ID_4=0a
|
||||
Device_ID_5=de
|
||||
Device_ID_5=69
|
||||
Device_ID_address=0x001e0024
|
||||
Device_ID_length=6
|
||||
Device_ID_auto_rolling=true
|
||||
@ -31,15 +31,15 @@ Device_name_length=
|
||||
EfuseFilePath=
|
||||
SecureFilePath=
|
||||
BinFileBufferSize=8388608
|
||||
RunAfterDownload=true
|
||||
RunAfterDownload=false
|
||||
Enable_Download_Main_Bin=true
|
||||
Enable_Download_Efuse=false
|
||||
Enable_Erase_All=true
|
||||
Enable_Erase_All=false
|
||||
Enable_Secure_Boot=false
|
||||
Enable_OTP=false
|
||||
Enable_Device_ID=true
|
||||
Enable_Device_ID=false
|
||||
Enable_Device_Name=false
|
||||
Enable_EnableBigEndian=true
|
||||
Enable_EnableBigEndian=false
|
||||
Enable_Debug=false
|
||||
Enable_GenericChip=false
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user