Supported Targets | BK7256 | BK7235 | BK7236 | BK7258 |
---|
Armino Wi-Fi static_ip exmaple
(See the README.md file in the upper level 'examples' directory for more informations about examples.)
How to use example
Configure the project
Kconfig.projbuild
Set following parameters under Example Configuration Options:
-
Set
WiFi SSID
andWiFi Password
under Example Configuration Options -
Set
static ip4 address
for your device -
Set
static ip4 netmask
for your device -
Set
static ip4 gateway
for your device -
Set
static ip4 dns server
for your device
Build and Flash
Build the example project with following command and flash all-app.bin to your board,run UART tool to see output
make bk7256 PROJECT=examples/wifi/static_ip
(Note: all-app.bin located in sdk/build/static_ip/bk7256)
Example Output
Note that the output may vary deponding on the practical environment.
When flashing successfully and power on, board will connect to configured target AP automaticly:
init:I(0):reason - power on
init:I(0):regs - 0, 55555555, aaaaaaaa
init:I(0):armino rev:
init:I(0):armino soc id:53434647_72560001
wifid I:(10): IP Rev: 802.11ax
wifi I:(308): wifi inited(1) ret(0)
STATIC:I(310):ssid:TP-LINK_923B password:12345678
mac:I(312):sync_mac_record, base mac:c8:47:8c:6b:66:c3
mac:I(314):sync_mac_record, saved base mac:c8:47:8c:6b:66:c3
lwip:I(636):configuring interface sta (with Static IP)
lwip:I(638):using static ip...
STATIC:I(642):STA connected to TP-LINK_923B
STATIC:I(646):STA got ip: 192.168.1.199