#ifndef __ILOCK_H__
#define __ILOCK_H__
#ifdef __cplusplus
extern "C" {
#endif


#define ILOCK_STATE_OPENED  0
#define ILOCK_STATE_CLOSED  1


#define CMD_CLOSE_LOCK              0x41
#define CMD_OPEN_LOCK               0x40
#define CMD_OPEN_LOCK_SOS           0x4A
#define CMD_PING                    0x49
#define CMD_OPEN_CAMERA             0x49
#define CMD_CLOSE_CAMERA            0x49
#define CMD_PLAY_VOICE              0x48
#define CMD_SET_UTC                 0x12
#define CMD_READ_STATE              0x44
#define CMD_READ_VERSION            0x21
#define CMD_READ_SERIALNO           0x20
#define CMD_FACTORY_RESET           0x24

#define CMD_LOCK_READ_FIRMWARE_VERSION     0x21 

/**
 *  0x1:请求包，都需要回复
    0x2:响应包，回复执行结果
    0x3:回执包，仅通知收到(高 4BIT)
*/
#define  CMD_TYPE_REQ  0x01
#define  CMD_TYPE_RET  0x02
#define  CMD_TYPE_REC  0x03//receipt

typedef struct
{
    int serial_no;//指令序号
    int cmd_type;
    char message_id[32];
    uint8_t cmds[128];
    int cmd_len;
    int retry_count;
    int timeout;
    int resp_state;//0 无回应，1-有回应
    int cmd_result; 

} lock_command_t;

typedef struct
{
    int serial_no;//指令序号
    int cmd_type;//指令

    int cmd_result;//指令结果
    uint8_t data[128];//返回数据
    uint8_t data_len;//返回长度
} lock_package_t;

typedef struct
{
    uint8_t data[64];//返回数据
    uint8_t data_len;//返回长度
} ota_version_t;

int ilock_send_lock_commond(char *message_id,int cmdType,int param);


typedef struct ilock_dev
{	
    uint8_t event_code;
    /**
     * 门状态
    */
    uint8_t lock_door_state;
    /**
     * 供电状态
    */
	uint8_t lock_power_supply;
    /**
     * 锁状态
    */
	uint8_t lock_lock_state;
    /**
     * 电池状态
    */
    uint8_t lock_batt_state;
    /**
     * 电池电量
    */
	uint8_t lock_batt_value;

    /**反锁状态*/
    uint8_t lock_lockedin_state;

    /**钥匙禁用*/
    uint8_t lock_disable_lock_state;

     
    char lock_params [32];
}ilock_dev;

extern ilock_dev  dev_info_lasted;

typedef struct ilock_client_cb_ops{

    /*
    *门铃事件
    */
    void (*event_doorbell)(int audio, int video);
    void (*event_lock_upload_state)(int state);
    void (*event_lock_serial_no)(char* serial_no ,int serial_no_len);
    void (*event_lock_version)(char* version ,int version_len);
    /**
     * 关锁  0-关锁失败   1- 关锁成功
    */
    void (*event_lock_lock)(int state);//
    /*
    * 开锁  0 -开锁失败   1- 开锁成功
    */
    void (*event_lock_unlock)(int state); //0-fail 1-succ

    /*
    * 紧急开锁  0 -开锁失败   1- 开锁成功
    */
    void (*event_lock_unlock_sos)(int state); //0-fail 1-succ

    /**
     * 配网事件
    */
    void (*event_network_boarding)();

    /**
     * 锁体状态
     */
    void (*event_lock_state)(ilock_dev *dev_info);
    void (*event_lock_params)(char *params, int len);
    /**
     * 串口数据
     */
    void (*event_lock_recv_data)(uint8_t *data, int len);
    //void (*event_lock_state)(int lockedin_state,int lock_state ,int door_state, int batt_state, int batt_cap, int lock_disable_lock_state);
}ilock_client_cb_ops_t;



void ilock_init(void);
void ilock_uart_init(void);
void ilock_uart_deinit();
void ilock_rx_start();
void ilock_rx_stop();
void ilock_uart_enable_rx();
void ilock_deinit(void);

void ilock_set_callback(ilock_client_cb_ops_t *cb_ops);
/**
* 开锁
*/
int ilock_open_lock(int uid);

/**
* 开锁SOS
*/
int ilock_open_lock_sos(int uid);
int ilock_read_status();
/**
* 关锁
*/
int ilock_close_lock(int uid);

/**
 * 反锁
*/
int ilock_enable_lockout();

/**
 * 解除反锁
*/
int ilock_disable_lockout();

/**
 * 钥匙启用
*/
int ilock_enable_key();

/**
 * 钥匙禁用
*/
int ilock_disable_key();

int ilock_read_state();

int ilock_read_version();

int ilock_read_serialno();

int ilock_set_utc(long utc);
/*
*获取锁体参数
*/
int ilock_read_lock_params();

int ilock_ping();

int ilock_play_voice(int voice_index);

int ilock_open_camera();
int ilock_close_camera();

/**
 * 恢复出厂设置
*/
int ilock_factory_reset();

/*
*给锁控制板发送消息
*/
int  ilock_sendData(char* data,int len);


char * ilock_client_get_device_id();

//OTA
int ilock_client_is_ota_mode();
int ilock_client_ota_start(int target,uint8_t* data, int data_len);

#ifdef __cplusplus
}
#endif
#endif