提交电量校准相关,关闭原来电量那套的log

bk_aidk/bk_avdk/bk_idk/components/bk_batt_monitor/bat_monitor.h

@@ -4,7 +4,7 @@
 #include "bk_gpio.h"
 #include "bk_uart.h"
 
-#define BAT_MONITOR_DEBUG
+//#define BAT_MONITOR_DEBUG
 
 #ifdef BAT_MONITOR_DEBUG
 #define BAT_MONITOR_PRT                 os_printf

bk_aidk/components/bk_factory_config/bk_factory_config.c

@@ -30,11 +30,14 @@
 
 static const uint32_t s_factory_volume = 7;
 
+static const uint32_t s_bat_offset = 0;
+
 const struct factory_config_t s_platform_config[] = {
     {"sys_initialized", (void *)"1", 1, BK_FALSE, 1},   // first config used to check whether factory config initialized.
     {"volume", (void *)&s_factory_volume, 4, BK_TRUE, 4},
     {"d_network_id", (void *)"\0", 1, BK_TRUE, 198},
     {"d_agent_info", (void *)"\0", 1, BK_TRUE, 162},
+    {"bat_offset", (void *)&s_bat_offset, 4, BK_TRUE, 4},
 };
 
 static const struct factory_config_t *s_user_reg_config = NULL;

bk_aidk/projects/beken_wss_paopao/main/bat_main.c

@@ -48,6 +48,8 @@
 #include <os/os.h>
 #include "sys_driver.h"
 #include <bat_main.h>
+
+#if (CONFIG_SYS_CPU0)
 #define BAT_DETEC_ADC_CLK 203125
 #define BAT_DETEC_ADC_STEADY_CTRL 7
 #define BAT_DETEC_ADC_SAMPLE_RATE 0
@@ -56,6 +58,8 @@
 #define BATTERY_MIN_VOLTAGE 3400
 
 static int batt_percent = 0;
+ int bat_offset = 0;
+uint16_t vol;
 static battery_main_event_callback_t s_battery_main_event_callback = NULL;
 int battery_main_event_callback_register(battery_main_event_callback_t callback)
 {
@@ -100,7 +104,8 @@ static uint16_t prvCalculateVoltage(void)
 static bk_err_t prvStartBatteryAdcOneTime()
 {
     // uint16_t value   = 0;
-    uint16_t vol;
+
+    uint16_t currend_vol;
     // int i1 = 0;
     //  if (vol == NULL) {
     //      BAT_MONITOR_WPRT("Error: vol pointer is NULL\r\n");
@@ -162,23 +167,26 @@ static bk_err_t prvStartBatteryAdcOneTime()
     // }
 
     vol = prvCalculateVoltage();
+    bk_printf("adc prevol %d offset %d \n", vol,bat_offset);
+
+    currend_vol = vol+ bat_offset;
     // BAT_MONITOR_PRT("ADC VALUE: %d .\r\n", *vol);
     gpio_dev_unmap(GPIO_50);
     bk_gpio_enable_input(GPIO_50);
     rtos_delay_milliseconds(100);
     uint8_t insert_value = bk_gpio_get_input(GPIO_50);
     bk_printf("Charging insert_value %d \n", insert_value);
-    bk_printf("ADC bat_value: %d mv\r\n", vol);
+    bk_printf("ADC currend_vol: %d mv\r\n", currend_vol);
 
-    batt_percent=(vol-BATTERY_MIN_VOLTAGE)*100/(BATTERY_MAX_VOLTAGE-BATTERY_MIN_VOLTAGE);
+    batt_percent=(currend_vol-BATTERY_MIN_VOLTAGE)*100/(BATTERY_MAX_VOLTAGE-BATTERY_MIN_VOLTAGE);
-	if(vol < BATTERY_MIN_VOLTAGE){
+	if(currend_vol < BATTERY_MIN_VOLTAGE){
 		batt_percent=0;
 	}
-	else if(vol > BATTERY_MAX_VOLTAGE){
+	else if(currend_vol > BATTERY_MAX_VOLTAGE){
 		batt_percent = 100; 
 	}
     bk_printf("batt_percent:%d\r\n",batt_percent); 
-    if (vol < 3500)
+    if (currend_vol < 3500)
     {
         if (s_battery_main_event_callback && insert_value == 0)
         {
@@ -228,6 +236,11 @@ void init_bat_timer()
     {
         bk_printf("rtos_start_bat_timer fail\r\n");
     }
+
+  
+    bk_config_read("bat_offset", (void *)&bat_offset, 4);
+
+    bk_printf("init_bat_timer_offset %d\r\n",bat_offset);
     prvStartBatteryAdcOneTime();
 }
 
@@ -254,7 +267,26 @@ void poweroff_voice()
 int  battery_get_percent(){
     return batt_percent;
 }
-
+//AT+BAT_CALIBRTATION
+int  battery_calibration(){
+    bk_err_t ret =  prvStartBatteryAdcOneTime();
+    
+     if (ret == BK_OK)
+    {
+      ret = 1;
+      bat_offset = 3980-vol;
+   
+      bk_config_write("bat_offset", (void *)&bat_offset, 4);
+      bk_config_sync_flash_safely();
+      bk_printf("BAT_CALIBRTATION SUCC ret: %d  new_offset = %d\r\n", ret,bat_offset);
+    }else{
+       ret = 0;
+       bk_printf("Failed to BAT_CALIBRTATION, err: %d\r\n", ret);
+    }
+   return ret;
+}
+
+#endif
 
 
 

bk_aidk/projects/beken_wss_paopao/main/bat_main.h

@@ -24,6 +24,8 @@ int battery_main_event_callback_register(battery_main_event_callback_t callback)
 void init_bat_timer();
 void poweron_voice();
 void poweroff_voice();
+
+int battery_calibration();
 /**
  * 获取电量百分百
  */

bk_aidk/projects/beken_wss_paopao/main/boarding_service/wifi_boarding_utils.c

@@ -836,6 +836,27 @@ static int32_t wifi_boarding_gatts_cb(bk_gatts_cb_event_t event, bk_gatt_if_t ga
                 ws2812_led_stop_ota();
 
                 
+            }
+             /**
+             * 用于APP 校准电池
+             */
+             else if (NULL != (ptr = strstr((char *)recv, "AT+BAT_CALIBRTATION")))
+            {
+                wboard_loge("AT+BAT_CALIBRTATION!!");
+
+                int ret = battery_calibration();
+
+                bk_printf("AT+BAT_CALIBRTATION ret: %d\r\n", ret);
+                uint8_t str_respone[32] = {0};
+                memset(str_respone, 0, sizeof(str_respone));
+                if(ret == 1){
+                    sprintf((char *)str_respone, "%s", "AT+BAT_CALIBRTATION=OK");
+                }else{
+                    sprintf((char *)str_respone, "%s", "AT+BAT_CALIBRTATION=FAIL");
+                }
+               
+               
+                wifi_boarding_notify(str_respone, strlen((char *)&str_respone));
             }
              /**
              * 12.获取设备状态